1. FreePBX
2. ringgroups
3. source strings
4. review

Please enter an extension list.

Provide a descriptive title for this Ring Group.

Provide a name for this Ring Group.

Remote Announce

Reset

Ring

Ring Group

Ring Group %s:

Ring Group Membership

Ring Group Module

Ring Group Name

Ring Group: %s

Ring Group: %s (%s)

Ring Groups

Ring Strategy

Ring Time

Ring Time (max 300 sec)

Ring Tone

Ring all available channels until one answers (default)

Ring first extension in the list, then ring the 1st and 2nd extension, then ring 1st 2nd and 3rd extension in the list.... etc. This strategy will work only when Confirm Calls is disabled.

Ring-Group Number

RingGroup

Ringer Volume Override

Select a Ring Tone from the list of options above. This will determine how your phone sounds when it is rung from this group.

Send Progress

Sequential

Should calls indicate answered elsewhere when a user answers.

Should this ringgroup indicate call progress to digital channels where supported.

Simultaneous

Skip Busy Agent

Submit

Take turns ringing each available extension

The group list can only contain a maximum of 255 characters.

The number users will dial to ring extensions in this ring group

These modes act as described above. However, if the primary extension (first in list) is occupied, the other extensions will not be rung. If the primary is FreePBX DND, it won't be rung. If the primary is FreePBX CF unconditional, then all will be rung

This ringgroup

Time in seconds that the phones will ring. For all hunt style ring strategies, this is the time for each iteration of phone(s) that are rung

Time in seconds that the phones will ring. For sequential ring strategies, this is the time for each iteration of phone(s) that are rung

Time must be between 1 and 300 seconds

Too-Late Announce

Transmit the Fixed CID Value below on calls that come in from outside only. Internal extension to extension calls will continue to operate in default mode.

Transmit the number that was dialed as the CID for calls coming from outside. Internal extension to extension calls will continue to operate in default mode. There must be a DID on the inbound route for this. This WILL be transmitted on trunks that block foreign CallerID

Transmit the number that was dialed as the CID for calls coming from outside. Internal extension to extension calls will continue to operate in default mode. There must be a DID on the inbound route for this. This will be BLOCKED on trunks that block foreign CallerID

Transmits the Callers CID if allowed by the trunk.

Use Dialed Number

Warning! Extension

When enabled, agents who are on an occupied phone will be skipped as if the line were returning busy. This means that Call Waiting or multi-line phones will not be presented with the call and in the various hunt style ring strategies, the next agent will be attempted.

When enabled, this will allow calls to the Ring Group to be picked up with the directed call pickup feature using the group number from any extension. When not checked, individual extensions that are part of the group can still be picked up by doing a directed call pickup by dialing the group number. Any extensions can still be picked up by doing a directed call pickup to the ringing extension , which works whether or not this is checked.

When set to Yes, agents who attempt to Call Forward will be ignored, this applies to CF, CFU and CFB. Extensions entered with '#' at the end, for example to access the extension's Follow-Me, might not honor this setting .

When set to true extensions that belong to one or more Ring Groups will have a Ring Group section and link back to each group they are a member of.