Source | Priority | Failing checks | |
---|---|---|---|
Inbound Fax Destination Change
|
Medium | ||
Inbound Fax Detection: %s (%s)
|
Medium | ||
Inbound faxes now use User Manager users. Therefore you will need to re-assign all of your destinations that used 'Fax Recipients' to point to User Manager users. You may see broken destinations until this is resolved
|
Medium | ||
Inherit
|
Medium | ||
Invalid Email for Inbound Fax
|
Medium | ||
Legacy
|
Medium | ||
Legacy: Same as YES, only you can enter an email address as the destination. This option is ONLY for supporting migrated legacy fax routes. You should upgrade this route by choosing YES, and selecting a valid destination!
|
Medium | ||
Letter
|
Medium | ||
Maximum transfer rate
|
Medium | ||
Maximum transfer rate can not be less than Minimum transfer rate
|
Medium | ||
Maximum transfer rate used during fax rate negotiation.
|
Medium | ||
Migrated user %s but unable to set email address to %s because an email [%s] was already set for User Manager User %s
|
Medium | ||
Migrating all fax users to usermanager
|
Medium | ||
Migrating faxemail field in the fax_users table to allow longer emails...
|
Medium | ||
Minimum transfer rate
|
Medium | ||
Minimum transfer rate used during fax rate negotiation.
|
Medium | ||
Moving simu_fax feature code from core..
|
Medium | ||
NV Fax Detect: Use NV Fax Detection; Requires NV Fax Detect to be installed and recognized by asterisk
|
Medium | ||
New fax from: %s
|
Medium | ||
New fax received
|
Medium | ||
No
|
Medium | ||
No Inbound Routes to migrate
|
Medium | ||
No fax detection methods found or no valid license. Faxing cannot be enabled.
|
Medium | ||
No: No attempts are made to auto-determine the call type; all calls sent to destination set in the 'General' tab. Use this option if this DID is used exclusively for voice OR fax.
|
Medium | ||
None
|
Medium | ||
On
|
Medium | ||
Outgoing Email address
|
Medium | ||
Outgoing fax results
|
Medium | ||
PDF
|
Medium | ||
Received & processed: %s
|
Medium | ||
Removing field %s from incoming table..
|
Medium | ||
Removing old globals..
|
Medium | ||
Reset
|
Medium | ||
SIP
|
Medium | ||
Select the default paper size.<br/>This specifies the size that should be used if the document does not specify a size.<br/> If the document does specify a size that size will be used.
|
Medium | ||
Settings
|
Medium | ||
Sip: use sip fax detection (t38). Requires asterisk 1.6.2 or greater and 'faxdetect=yes' in the sip config files
|
Medium | ||
Submit
|
Medium | ||
Successfully migrated faxemail field
|
Medium | ||
TIFF
|
Medium | ||
The following Inbound Routes had FAX processing that failed migration because they were accessing a device with no associated user. They have been disabled and will need to be updated. Click delete icon on the right to remove this notice.
|
Medium | ||
The outgoing Fax Machine Identifier. This is usually your fax number.
|
Medium | ||
This may be formatted as just '[email protected]', or 'Fax User <[email protected]>'. The second option will display 'Fax User' in the 'From' field in most email clients.
|
Medium | ||
Type of fax detection to use (e.g. SIP or DAHDI)
|
Medium | ||
Type of fax detection to use.
|
Medium | ||
Unable to migrate %s, because [%s]. Please check your 'Fax Recipients' destinations
|
Medium | ||
Updating simu_fax in miscdest table..
|
Medium | ||
User Manager users '%s' have the ability to receive faxes but have no email address defined so they will not be able to receive faxes over email,
|
Medium | ||
Via
|
Medium | ||
WARNING: Failed migration. Email length is limited to 50 characters.
|
Medium |