1. FreePBX Commercial
2. vega
3. source strings
4. review

?

Are you sure to change Gateway SIP DRIVER ?

Are you sure to change Vega gateway SSH port and reboot immediately(on submit) ?

Are you sure to change Vega gateway ip and reboot immediately(on submit) ?

Are you sure to change Vega gateway ip type method to External/NAT ?

Are you sure to reset vega gateway configuration and push pbx vega module generated configuration to Vega gateway ?

Firmware Upgrade

Force Refresh Status

.*

Action

Add Vega

Admin Password

Advanced

Alternative DNS Server

Applying Config and Rebooting Vega...It will take couple of min..

Applying Config to Vega...
Please check 'status' to know if reboot required to apply config.

Are you sure to upload config file

Available Firmware

Basic Config

CLI command(%s) validation failed, expacted (%s), result(%s)

Cache Expiration

Caller ID Can not be empty

Caller Id

ChanSIP

Change Password

Changing Vega Gateway configuration file

Clock Master

Comma separated list of emergency telephone numbers

Configure

Connectivity

Country

Country to configure (pre-configured values for ring tone, FXO/FXS parameters etc)

CrossOver

DHCP

DID to Forward to FreePBX

DSP Failure
%s
Please refer to <a href='https://wiki.freepbx.org/display/VG/Firmware+Update#FirmwareUpdate-DSPUpgradeProcedure'> DSP Upgrade Using VEGA GUI </a>

Delete

Digital Rx Gain

Digital Rx Gain

Digital Rx Gain is Empty

Digital Tx Gain

Digital Tx Gain

Digital Tx Gain is Empty

Discovery

Download Config

Download Latest Firmware

Download Vega Config File

Downloading is in progress...

Due to changing SSH port, Vega GW will reboot automatically

Duplicate Extension Selected